Enclosure and junction boxes

Enclosure and junction boxes

Weather proof boxes with a minimum protection index of IP66.

Manufactured in the following materials:

• Cooper free aluminium alloy with a thin wall or thickened wall (suitable for NPT).
• Polyester reinforced with Fibre optics.
• Stainless steel.
• Sheet steel.
• Polycarbonate.

Boxes for American/Canadian regulations. (Standard UL-50, CSA C22.2) manufactured in the following materials:

•  Copper-free aluminium with a thin wall or thickened wall (suitable for NPT).
• Sheet steel.

Boxes for hazardous areas.

ATEX and IECEx regulations

Type of protection:

Exe. suitable for classification II 2GD Exe II T6/T5 (zone 1,2,21,22)

Exia/ib. suitable for classification II 2GD Exia/ib IIC T6/T5 (zone 1,2,21,22)

Exd. suitable for classification II 2GD Exd IIB/IIC T6/T5 (zone 1,2,21,22)

Exn. suitable for zone 2.

Manufactured in the following materials:

• Copper-free aluminium with a thin wall or thickened wall (suitable for NPT).
• Polyester reinforced with Fibre optics.
• Stainless steel.
• Sheet steel.
• Polycarbonate.

For American (Directive NEC 500 / NEC 505)

NEC 500:

• Suitable for gas: Class I, Division 1, Division 2, Groups A,B,C,D, T6.
• Suitable for dust: Class II, Division 1, Division 2, Groups E,F,G, T6.
• Suitable for fibres: Class III.

NEC 505:

• Suitable for gas: Class I, Zone 1,2, AEx ed IIC T6
• Suitable for dust: Class II, Zone 1,2, AEx ed IIC T6